Stallion U-Joint

[Dean H]

A reminder to check and grease the U-Joint periodically.

 

[Gold Rush]

Ouch!! Hopefully it wasn't too difficult getting that sucker out. Did it leave you stranded Dean?

Get-er fixed and get out there!! :xszpv::xszpv:

 

[Dean H]

Ouch!! Hopefully it wasn't too difficult getting that sucker out. Did it leave you stranded Dean?

Get-er fixed and get out there!! :xszpv::xszpv:

I was coming home from a rally traveling 75-80 mph. I started to feel a vibration thru the gas pedal and when I slowed down to stop for gas I could then hear the screeching sound. I limped it home and all fixed today. Easy to unbolt the u joints. It a ordinary joint so easy to find.

 

[Gorilla]

The real issue is trying to get grease in the joint. Very hard to get onto the fitting if you even due.

 

[Ployboy]

I recently tried to grease my U-joints. I could not get the grease gun on the zerk. It just would not quite line up so I could. Have others had this issue? Maybe a different angled zerk or a skinny gun nozzle, if there is such a thing.

John in Olney, TX

White Stallion #142

 

[Dean H]

I recently tried to grease my U-joints. I could not get the grease gun on the zerk. It just would not quite line up so I could. Have others had this issue? Maybe a different angled zerk or a skinny gun nozzle, if there is such a thing.

John in Olney, TX

White Stallion #142

It appears a needle nozzle is needed:

 

[Ployboy]

Dean, thanks for that video. I'll get a needle injector for my gun.

John

 

[Doc7402]

A reminder to check and grease the U-Joint periodically.

View attachment 39114

Dean whats your milage now ?

 

[trikervet]

I have lubed mine twice in 56K. I put the bike on ramps, then jack one wheel clear so that I can rotate it and get a clear shot on each fitting. I have one of those injectors, but I was able to get on it with a standard grease fitting. I use the Ford long life grease.

 

[tomg]

Disconnected the drive shaft and greased mine yesterday.
Tomg

 

[Ed Hobgood]

Greased the U-Joint with the injector and it worked great. I wish everything worked that easy.ThumbUp

 

[Gorilla]

Greased the U-Joint with the injector and it worked great. I wish everything worked that easy.ThumbUp

Ed can you please post a picture of the "injector" that you used. I've yet to find one to work for me.

 

[Ed Hobgood]

Ted, I got the injector at O'Reilly and the item number is PFM W54216 and it cost $7.99 I'm trying to send a picture but for some reason I've not been able to get it to download (to big).

How's the weather for you guys down there?

 

[Gorilla]

Thanks ED Looks like just some wind for right now unless it turns.