- Thread starter
- #561
Now to do the other half.
Anyone else?
- Thread starter DeathBySnuSnu
- Start date
- Thread starter
- #562
Some tightened up axle nuts and the oil in the trans.
- Thread starter
- #563
The other header done.
- Thread starter
- #564
I had the coils backwards and the ground for the tps disappeared.
Flipped the coil wired and jumped the ground on rod. Then it lit right up.
Battery is dead and the alt belt is squealing.
[video]https://drive.google.com/file/d/0B291Vwl-NHGeV2J3S0pObWoyVDA/view?usp=drivesdk[/video]
Flipped the coil wired and jumped the ground on rod. Then it lit right up.
Battery is dead and the alt belt is squealing.
[video]https://drive.google.com/file/d/0B291Vwl-NHGeV2J3S0pObWoyVDA/view?usp=drivesdk[/video]
vwbug72501
700+ Posts
WAY TO GO, REX!!!!!!!!!!:banana-pair::banana-cyclops::banana-mac:
- Thread starter
- #566
All the mix and match electronics are trying to work.
It seems lean.
Gonna scale up the gas and try it again.
Just not enough time to stay on it.
It seems lean.
Gonna scale up the gas and try it again.
Just not enough time to stay on it.
- Thread starter
- #567
It has now been run through several warm up cycles.
Things are loosening up and settling in.
Over the first start hots.
Scaled up the fuel tables and have it rich now.
The ford idle air valve is online now and working.
It idles on its own now.
The base timing is checked and was on 10 advanced with no advance command (no spark advance word from computer). That is the way ford intended it.
I reved it one time high enough to hit the cam.
It sounds beefy/chunky like a big block Chevy at idle and down low.
But when the cam comes in it suddenly changes and becomes a big motorcycle sounding engine.
Gonna be wild.
Things are loosening up and settling in.
Over the first start hots.
Scaled up the fuel tables and have it rich now.
The ford idle air valve is online now and working.
It idles on its own now.
The base timing is checked and was on 10 advanced with no advance command (no spark advance word from computer). That is the way ford intended it.
I reved it one time high enough to hit the cam.
It sounds beefy/chunky like a big block Chevy at idle and down low.
But when the cam comes in it suddenly changes and becomes a big motorcycle sounding engine.
Gonna be wild.
LarryA
500+ Posts
payday (finally)
sounds good! lot of things had to come together to make the music! play another song....
sounds good! lot of things had to come together to make the music! play another song....
You've said a mouthful. I can't remember, do you have wheelie bars?
- Thread starter
- #570
Nope.
No wheelie bars.
Sorta amazing all the mix and match parts are all working together.
Now to finish that tank.
No wheelie bars.
Sorta amazing all the mix and match parts are all working together.
Now to finish that tank.
- Thread starter
- #571
It idles.
Gotta finish that tank.
https://drive.google.com/file/d/0B291Vwl-NHGedVFWd3d1SElVNEE/view?usp=drivesdk
Gotta finish that tank.
https://drive.google.com/file/d/0B291Vwl-NHGedVFWd3d1SElVNEE/view?usp=drivesdk
- Thread starter
- #572
Does video work this way?
[video]https://drive.google.com/file/d/0B291Vwl-NHGedVFWd3d1SElVNEE/view?usp=drivesdk[/video]
[video]https://drive.google.com/file/d/0B291Vwl-NHGedVFWd3d1SElVNEE/view?usp=drivesdk[/video]
- Thread starter
- #573
- Thread starter
- #575
I was trying to get in a window with a Google drive link.
Like YouTube will do.
Like YouTube will do.
- Thread starter
- #576
Worked on that gas tank the last couple late evenings.
Great video, sure is a torquey thing. 
- Thread starter
- #578
The sound overwhelms the cell phone pretty badly.
It sounds more like a big block Chevy until it get on the cam.
It has not been over 3500 yet.
Just barely enough to come into the cam.
Changes quick then and sounds more like a motorcycle.....a very big motorcycle.....but the scream sound of a honda.
This is a 7500 rpm engine.
It sounds more like a big block Chevy until it get on the cam.
It has not been over 3500 yet.
Just barely enough to come into the cam.
Changes quick then and sounds more like a motorcycle.....a very big motorcycle.....but the scream sound of a honda.
This is a 7500 rpm engine.
LarryA
500+ Posts
like the idle sound, reminds me of a radial aircraft engine just started,before they smooth out. nice snap on the exhaust, idle rpm wandering around a little, I'm sure mixture changes will iron that out. I like it!
+1 ... a way kewl one of a kind
Welcome to the Trike Talk Community
Join our vibrant online community dedicated to all things Trikes! Whether you're a seasoned rider or just starting out, this is the place to share experiences, tips, and stories about your three-wheeled adventures. Explore modifications, maintenance advice, and rides, all while connecting with fellow trike enthusiasts from around the globe
Forum statistics
Trike Talk Community
Welcome to a community dedicated to the most diverse and fastest growing powersports segment, Motorcycle Trikes. Come join the discussion about the best makes and models, popular modifications and proven performance hacks, trike touring and travel, maintenance, meetups and more!
Register Already a member? LoginForum statistics
Share this page
