I’m really wanting an increase in sound without becoming over the top. How can I achieve that?
Muffler mod for a volusia
- Thread starter DaveD
- Start date
rhino 2
100000 + Posts
Hi......Dave' Welcome to Trike-Talk.....:wave4:....Sound is a very Subjective!
I'm sure you'll get a lot of opinions on that.....I went through that many-many years ago,
Good luck with your Quest just don't go over board 'Start off small and work your way up......
Again' Dave Welcome to the greatest Trike Forum' ''Trike-Talk''...:clapping:....
wehrme
250+ Posts
VolusiaRiders.com
All the info you need. I had a '02 Suzi and did the mod to my exhaust.
I am assuming that you have the stock exhaust ???
All the info you need. I had a '02 Suzi and did the mod to my exhaust.
I am assuming that you have the stock exhaust ???
Trikemaker
Sponsor
Hi DaveD,
The mufflers installed on your Volusia kit are a diffused disc type of muffler.
One way to make them louder is to remove the end cap by taking off the chrome tip and then removing the cap. This will make it quite a bit louder.
If it is too loud you might want to repack the fiberglass inside the core of the muffler. We stock this packing if you need some.
If that is still too loud you can add a couple more diffuser discs and leave the end cap on.
Good luck,
The mufflers installed on your Volusia kit are a diffused disc type of muffler.
One way to make them louder is to remove the end cap by taking off the chrome tip and then removing the cap. This will make it quite a bit louder.
If it is too loud you might want to repack the fiberglass inside the core of the muffler. We stock this packing if you need some.
If that is still too loud you can add a couple more diffuser discs and leave the end cap on.
Good luck,
3W-lonerider
350+ Posts
any chance of telling us where we can get the diffuser disks. i would like to add a few on each side.
I found some on eBay by using “SuperTrapp disk” in the search bar. I lost half on the right side because the screws fell out.
3W-lonerider
350+ Posts
thank you i will look into that. btw they should be 3 inch disk if i'm thinking right.
Yes, that’s right.
3W-lonerider
350+ Posts
thank you for the reply and the conformation of them being 3 inch..
Welcome to the Trike Talk Community
Join our vibrant online community dedicated to all things Trikes! Whether you're a seasoned rider or just starting out, this is the place to share experiences, tips, and stories about your three-wheeled adventures. Explore modifications, maintenance advice, and rides, all while connecting with fellow trike enthusiasts from around the globe
Forum statistics
Trike Talk Community
Welcome to a community dedicated to the most diverse and fastest growing powersports segment, Motorcycle Trikes. Come join the discussion about the best makes and models, popular modifications and proven performance hacks, trike touring and travel, maintenance, meetups and more!
Register Already a member? LoginForum statistics
Share this page
