Muffler mod for a volusia

[DaveD]

I’m really wanting an increase in sound without becoming over the top. How can I achieve that?

 

[rhino 2]

I’m really wanting an increase in sound without becoming over the top. How can I achieve that?

Hi......Dave' Welcome to Trike-Talk.....:wave4:....Sound is a very Subjective!

I'm sure you'll get a lot of opinions on that.....I went through that many-many years ago,

Good luck with your Quest just don't go over board 'Start off small and work your way up......

Again' Dave Welcome to the greatest Trike Forum' ''Trike-Talk''...:clapping:....

 

[wehrme]

VolusiaRiders.com

All the info you need. I had a '02 Suzi and did the mod to my exhaust.

I am assuming that you have the stock exhaust ???

 

[Trikemaker]

Hi DaveD,

The mufflers installed on your Volusia kit are a diffused disc type of muffler.

One way to make them louder is to remove the end cap by taking off the chrome tip and then removing the cap. This will make it quite a bit louder.

If it is too loud you might want to repack the fiberglass inside the core of the muffler. We stock this packing if you need some.

If that is still too loud you can add a couple more diffuser discs and leave the end cap on.

Good luck,

 

[3W-lonerider]

Hi DaveD,

The mufflers installed on your Volusia kit are a diffused disc type of muffler.

One way to make them louder is to remove the end cap by taking off the chrome tip and then removing the cap. This will make it quite a bit louder.

If it is too loud you might want to repack the fiberglass inside the core of the muffler. We stock this packing if you need some.

If that is still too loud you can add a couple more diffuser discs and leave the end cap on.

Good luck,

any chance of telling us where we can get the diffuser disks. i would like to add a few on each side.

 

[Ben_D]

any chance of telling us where we can get the diffuser disks. i would like to add a few on each side.

I found some on eBay by using “SuperTrapp disk” in the search bar. I lost half on the right side because the screws fell out.

 

[3W-lonerider]

I found some on eBay by using “SuperTrapp disk” in the search bar. I lost half on the right side because the screws fell out.

thank you i will look into that. btw they should be 3 inch disk if i'm thinking right.

 

[Ben_D]

thank you i will look into that. btw they should be 3 inch disk if i'm thinking right.

Yes, that’s right.

 

[3W-lonerider]

Yes, that’s right.

thank you for the reply and the conformation of them being 3 inch..