Rebel RT

[TomyJ]

Will this work with each signal light??? -SYLVANIA - Load Equalizer 27 Watt (at 12.8V) - Turn Signal Load Equalizer for LED Light Bulbs, Corrects Hyper Flash & Bulb Out Warning.

[Jack Klarich]

Will this work with each signal light??? -SYLVANIA - Load Equalizer 27 Watt (at 12.8V) - Turn Signal Load Equalizer for LED Light Bulbs, Corrects Hyper Flash & Bulb Out Warning.

That should work You should need 1 for each circuit IE 1 for front and rear turn signals and 1 for running lights, same for brake lights

[stacebg]

That should work You should need 1 for each circuit IE 1 for front and rear turn signals and 1 for running lights, same for brake lights

WHY FOR THE BRAKE AND RUNNING LIGHTS??

I BELIEVE ITS ONLY TO PUT ENOUGH RESISTANCE IN TO MAKE THE BLINKER WORK

oops srry about caps

[stacebg]

Led lights use low voltage. You will need a load equalizer to make them work.

Look here https://www.amazon.com/SYLVANIA-Equa...8609126&sr=8-3

actually in his case they are working on 12 volts but because the amps are lo the flasher doesnt work

[Jack Klarich]

actually in his case they are working on 12 volts but because the amps are lo the flasher doesnt work

Thank you, I stand corrected Should we change amps for watts?

[stacebg]

Thank you, I stand corrected Should we change amps for watts?

not sure but i dont think so

watts is v x amps

[vwbug72501]

FYI: Power (Watts) = I (current)(Amps) X V (voltage) (Volts).

[TomyJ]

Time to take a break all, Early Happy Hour!!! And a special ThankYou to all that has helped me with this build...

[TomyJ]

-I love it when Happy Hour is all day...

[stacebg]

-I love it when Happy Hour is all day...

what happened to your floor???

supposed to be covered w crap

[TomyJ]

what happened to your floor???

supposed to be covered w crap

You do not know my wife,

[TomyJ]

This was my garage before the move of 2018, Finishing up on the "Trikester" and much mock up on the "RebelRouser"... "HAPPY NEW YEAR EVERYONE"...

[stacebg]

This was my garage before the move of 2018, Finishing up on the "Trikester" and much mock up on the "RebelRouser"... "HAPPY NEW YEAR EVERYONE"...

THATS BETTER

[TomyJ]

Damn I love to hear this engine running,BUTTTTT! Need to finish the brakes before a ride can happen so I need to tighten the front brakes through cable adjustment and if not I'll need to get into the shoe drum adjusters and tighten, but the rear brake master cylinder bracket will flex (1/8 wall) when I push on the foot brake so I made some side braces for the bracket (3/16) welding soon, then back to the wiring for the lights...

[TomyJ]

-3/16 side braces, OverKill, need to make metal clamp for the return spring, then bleed, check brake light switch, ROAD TEST!!!

[TomyJ]

M/C return spring works, bleed the brakes many times but just not quite there??? But it does work...

[Jack Klarich]

M/C return spring works, bleed the brakes many times but just not quite there??? But it does work...

How is the free travel on the brake rod?

[TomyJ]

-Decisions, Decisions, Decisions?

[Gorilla]

I vote for finishing the rebel first.

[Zammy]

I'm with Ted, Rebel comes first.