Well I guess I know myself better then to have put it in print but.
Im already tearing into my new to me 1 week old trike.
Today I put on the Kury brake pad extention big w00p there as its a no beer job.
Then I put on the MLB risers.
http://wingstuff.com/products/2361-handlebar-risers-standard-or-tall-rider-version?from_search=1
Are then any better then the Kury set any worse??
Who knows??, all I do know is they were $10 more.
I got I guess what is the standard set about in 1 inch up 1.5-2 back and for me most important 2 inches in closer together.
They feel alot differnet then stock does thats for sure.
Better for me??
Dunno Ill find out tomorrow.
Will see how much less my shoulder hurts when I get to work.
Now a few things.
Both their instructions and Hondas Manual.
They both stink.
1st thing it says to do is remove the speaker grills.
So what did I do??
I literally tried to take off the mesh speaker grills.
WRONG!!!!
They dont come off and of course now I have a slightly but thankfully not badly mared up panel.
Both sets of directions tell you to remove the clips at the top and bottom of the grills.
Well they aint there. There arent any on the mesh grills..
Im sure most of you know whats next.
Just pull the whole dang panel thing off of the bike.
20 minutes futzing with the speaker grills for a 2 second yank of the whole panel.
Then of course theres the clips for the tweeters and the heated stuffs harness.
I had pulling a tough time with the clips coming apart too.
Never enough wire to see where the clip release is.
Anyway a 30 minute job.
1 beer is all it is in reality.
Took me an hour. Due to the instructions.
Next time Im changing something on this tupperware bike.
Ill ask here 1st.
Now the same exact post is going into tje 1800 forum so sorry for repeating if you read both.
Jay
Im already tearing into my new to me 1 week old trike.
Today I put on the Kury brake pad extention big w00p there as its a no beer job.
Then I put on the MLB risers.
http://wingstuff.com/products/2361-handlebar-risers-standard-or-tall-rider-version?from_search=1
Are then any better then the Kury set any worse??
Who knows??, all I do know is they were $10 more.
I got I guess what is the standard set about in 1 inch up 1.5-2 back and for me most important 2 inches in closer together.
They feel alot differnet then stock does thats for sure.
Better for me??
Dunno Ill find out tomorrow.
Will see how much less my shoulder hurts when I get to work.
Now a few things.
Both their instructions and Hondas Manual.
They both stink.
1st thing it says to do is remove the speaker grills.
So what did I do??
I literally tried to take off the mesh speaker grills.
WRONG!!!!
They dont come off and of course now I have a slightly but thankfully not badly mared up panel.
Both sets of directions tell you to remove the clips at the top and bottom of the grills.
Well they aint there. There arent any on the mesh grills..
Im sure most of you know whats next.
Just pull the whole dang panel thing off of the bike.
20 minutes futzing with the speaker grills for a 2 second yank of the whole panel.
Then of course theres the clips for the tweeters and the heated stuffs harness.
I had pulling a tough time with the clips coming apart too.
Never enough wire to see where the clip release is.
Anyway a 30 minute job.
1 beer is all it is in reality.
Took me an hour. Due to the instructions.
Next time Im changing something on this tupperware bike.
Ill ask here 1st.
Now the same exact post is going into tje 1800 forum so sorry for repeating if you read both.
Jay