I have a Motor Trike kit on my 2001 Electra Glide. I converted it to a chain drive because I've broken 2 belts in the past year. I do all of my work myself so I've taken it apart several times before. However, after replacing the sprocket and getting the bike put back together, I went to do the test ride and the bike would not move. Chain is turning the rear sprocket but the wheels will not move. I'm certain I stabbed the axles properly and have them seated. Any ideals of what the problem could be? Rear wheels are just free spinning. Any help would be appreciated. Not looking forward to taking this thing apart again without any ideal of what the problem could be.
motor trike rear end problem
- Thread starter Big Hustla
- Start date
Cliff......Welcome to Trike-Talk.....:clapping:.....I can't help much with the problem, But if i recall right there was a thread on the same problem....Maybe someone will chime in with a better memory than mine ..And give you a link to it....
Found the tread........Titled..; Freewheeler won't move.....Posted 12/23/19...
Maybe it will give you an idea.....
Hi Cliff! No help as to the problem - just want to welcome you to TrikeTalk from the Texas Hill Country! I hope you get the problem resolved soon.
And if you are in Mesquite, TEXAS - come on down to Kerrville to our TrikeTalk meet and greet April 19-23. See the thread: KERRVILLE 2020
And if you are in Mesquite, TEXAS - come on down to Kerrville to our TrikeTalk meet and greet April 19-23. See the thread: KERRVILLE 2020
i went looking for this thread and didnt find it.. perhaps you could copy the address and post it??
Similar threads
Share this page
