Oct. 22,2012
I was wondering where to mount the EZpass tag on my motorcycle. After reading a couple of articles from back in 2007, I decided to post my thoughts. I was at a Harley dealer over the weekend and saw a black metal EZpass holder and a chrome metal EZpass holder. The black was $35 and the chrome was $45. I have a 2005 GL1800 Lehman Monarch II trike and I already installed the Kuryakan flat plate on the brake mount holders on the handlebars. I hung my cell phone on it in a leather holder. I then decided that I want to put the EZpass tag there instead. I went to Pep Boys today and found that they sell a black plastic tag holder for $4.95. I bougth 3 of them.
One for each of my two cars and one for the trike.
I used double back tape to hold the EZpass holder to the chrome metal bracket from Kuryakan which mounts to the two allen screws that hold on the clutch lever.(same as the other two on the right side of the handlebars, where the front brake hydraulic lever is). I just slide the tag in and out when I leave the bike. That couldn't be easier. Put it in the truck if you wish to or anywhere else you might hide it. I enclosed a couple of pics of the installation. Simple and easy. I know there are lots of other handlebar mounts that you could do the same thing with.
Gordon L. (Delanco, New Jersey):GL1800:
Please excuse the glare from the flash on the chrome areas. The closed back of the holder is double taped to the front of the bracket.
The open area faces forward and the tag just slides in as it would if you had it on your windshield.
I was wondering where to mount the EZpass tag on my motorcycle. After reading a couple of articles from back in 2007, I decided to post my thoughts. I was at a Harley dealer over the weekend and saw a black metal EZpass holder and a chrome metal EZpass holder. The black was $35 and the chrome was $45. I have a 2005 GL1800 Lehman Monarch II trike and I already installed the Kuryakan flat plate on the brake mount holders on the handlebars. I hung my cell phone on it in a leather holder. I then decided that I want to put the EZpass tag there instead. I went to Pep Boys today and found that they sell a black plastic tag holder for $4.95. I bougth 3 of them.
One for each of my two cars and one for the trike.
I used double back tape to hold the EZpass holder to the chrome metal bracket from Kuryakan which mounts to the two allen screws that hold on the clutch lever.(same as the other two on the right side of the handlebars, where the front brake hydraulic lever is). I just slide the tag in and out when I leave the bike. That couldn't be easier. Put it in the truck if you wish to or anywhere else you might hide it. I enclosed a couple of pics of the installation. Simple and easy. I know there are lots of other handlebar mounts that you could do the same thing with.
Gordon L. (Delanco, New Jersey):GL1800:
Please excuse the glare from the flash on the chrome areas. The closed back of the holder is double taped to the front of the bracket.
The open area faces forward and the tag just slides in as it would if you had it on your windshield.
Last edited: