TomyJ
600+ Posts
- Thread starter
- #261
...Now who is thinking outside the BOX, I like it, Thanks for stopping by Andy I like the input, BUTTT I can not afford the exhaust work and there is no room (cg) under the frame. My goal is to use as many parts as possible from the Rebel, My LOVE is in the building, strong and safe, Then build another something, (side car?)...I could be off the mark here, but looking at the exhaust pipes they seem to have a bend design off the head outward to the side of the engine.Now if you put the left side pipe on the right side, and the right side pipe on the the left side of engine, the would the bend be inward from both pipes.Now I just realized they pipes do not have enough down ward length to ride under the frame down the center, plus the rear tire gets in way.So now custom pipes, thinking I might have taken that route myself, basically because I do not like my legs around the exhaust pipes. If they did go down the center under the engine, than a short 30 or 60 degree bend to make them come out the side, behind passenger seat would be ideal, but behind rider seat would look sporty. Wonder how load open pipes on that engine would sound. The width of the front end does allow you top bring out the foot pegs as far as you need, key is long as all is safe and comfy for you.