Stock, dual port, 1600cc with 34ict's, dvda distributor. What plugs are yall running? Which plugs and what reach? Just wondering.
Excellent Post Fowler!!!!!
Good post but what I am wondering is should I use short or long plugs or does it make any difference. This is what I was wondering. I have been using the short reach Bosch plugs. Thanks
Excellent Post Fowler!!!!!
That depends on the thread depth.
If you have stock heads then it should be 1/2 if you have aftermarket heads it could be 1/2 or 3/4
Maybe your heads have some marking on them you can look up?
I have never tried it but I guess you could rig up something to measure the thread length.
There may even be a tool for that. I don't know
- - - Updated - - -
I cant rely take credit for the post. Its a combo of several other posts I read
If it is stock then run the stock plug.
My favorite for stock head and aftermarket coil.
Ngk bp6ht
Or
Bosch w7btc
Finding them might be difficult.
If caint find, then normal bosch copper plus in a 7 range.