Fuel pump help

[Nighttrain]

The pushrod in my fuel pump is not straight up. It's leaning over to the side so how do I get it straight up again? It's a generator type 4 1/4"..

 

[Bruce]

help getting it straight

Viagra ???? :cxtv::cxtv::cxtv:

The pushrod in my fuel pump is not straight up. It's leaning over to the side so how do I get it straight up again? It's a generator type 4 1/4"..

 

[DeathBySnuSnu]

Sounds like the plastic push rod guide is worn out or broken.

 

[Nighttrain]

I can't put the plastic guide on because the pushrod is canted over. The pushrod will not stand up straight to put the plastic guide on.

- - - Updated - - -

Viagra ???? :cxtv::cxtv::cxtv:

Tried that but it clogged my fuel line. lol

 

[DeathBySnuSnu]

Any type 1 I have ever seen the push rod is held in by the plastic guide.
As in ..... the guide goes in first, then the rod, then the pump. Not counting gaskets.
If you are trying to get the rod in first I suppose you are just lucky that it has not fallen through into the cam gear galley. Not much fun splitting a case just to fetch out a dropped part.

You do have a type 1?
Picture up so we can help you better.

 

[Nighttrain]

Any type 1 I have ever seen the push rod is held in by the plastic guide.
As in ..... the guide goes in first, then the rod, then the pump. Not counting gaskets.
If you are trying to get the rod in first I suppose you are just lucky that it has not fallen through into the cam gear galley. Not much fun splitting a case just to fetch out a dropped part.

You do have a type 1?
Picture up so we can help you better.

Thanks. I have been trying to put the pushrod in first. The guide goes first. Again thanks a million.

 

[stinger608]

If the plastic guide and block are not broke, then I would have to believe that the fuel pump push rod is bent.

It would really help if you could take some pictures of the push rod laying flat on a surface and pictures of the guide block.

 

[Fowler]

So I am just wondering why use a manual pump?
I just put a block off plate on mine and I use a electric pump.

Is there some advantage of a manual pump I am not seeing?

 

[rhino 2]

So I am just wondering why use a manual pump?
I just put a block off plate on mine and I use a electric pump.

Is there some advantage of a manual pump I am not seeing?

Apples to Oranges .....:Shrug:
I did that with all my Drag cars in the 60's.. The last one was on my 68 Charger 440 Duel pumper close to the gas tank..

 

[1dn5up]

Don't forget the pressure regulator

 

[Fowler]

Don't forget the pressure regulator

yep I have one on mine set to 3 1/2

 

[mike hardigree]

help

what kind of regulator are you using , having a hard time cranking mine after sitting after warm seems to be flooding electric pump no regulator.

 

[Fowler]

you can see it in this pic
I dont know what make/model it is
I think I got it from Advanced auto

 

[mike hardigree]

thanks so much bought one today hoping this stops my hard starting after she is warmed up and left setting 10 to 15 min.

 

[mike hardigree]

installed the mr gasket regulator set at 3.5 30 min. ride let set 10 min. cranked right up not a good test yet but a lot better than what it was doing thanks again for the help.

 

[stinger608]

installed the mr gasket regulator set at 3.5 30 min. ride let set 10 min. cranked right up not a good test yet but a lot better than what it was doing thanks again for the help.

That's great news so far Mike!!!!! Hopefully, that has cured your issue man.