adjusting the park brake

[Capt Lou]

I adjusted the park brake the best I could and it still not holding. There was a recall on the 2012 TG on the pads and roters. It held for awhile and now nothing. What do you think?

 

[Trent]

It is an easy fix.... Just remove the whole parking brake assembly, stuff it in a box, and place the box on a shelf in your garage. That is where mine is, and I never have a problem with it ever. It works flawlessly sitting there gathering dust and stewing about how it cant irritate me anymore. It may miss me, but I don't miss it at all. And neither will you. Mine came off 1 month after I got my TG.

 

[lboos]

It is an easy fix.... Just remove the whole parking brake assembly, stuff it in a box, and place the box on a shelf in your garage. That is where mine is, and I never have a problem with it ever. It works flawlessly sitting there gathering dust and stewing about how it cant irritate me anymore. It may miss me, but I don't miss it at all. And neither will you. Mine came off 1 month after I got my TG.

Trent,
How big a job is it to remove it ? did you remove all the linkage or just the handle ? how long did it take to complete the job.
I hate that dam thing :gah:.

 

[Trent]

I had my HD shop do it. Took him 30 minutes. When I told them I wanted that piece of crap off of my Trike, they just laughed and said they understood, and no problem. Removed the whole thing,, handle, linkage, cables, irritation. All gone!

 

[Capt Lou]

It is an easy fix.... Just remove the whole parking brake assembly, stuff it in a box, and place the box on a shelf in your garage. That is where mine is, and I never have a problem with it ever. It works flawlessly sitting there gathering dust and stewing about how it cant irritate me anymore. It may miss me, but I don't miss it at all. And neither will you. Mine came off 1 month after I got my TG.

Sound like a great idea but how do you secure from rolling while it is running?

 

[Trent]

Sound like a great idea but how do you secure from rolling while it is running?

Use your brakes. Or do you mean if you are not on the Trike while it is sitting there idling? If that is the case, make sure you are sitting somewhere level. Never been a problem for me. Many TG owners on this site have gone the full removal route also. Don't remember ever hearing anyone regret doing so.

 

[delta]

Sound like a great idea but how do you secure from rolling while it is running?

I use a Velcro strap and put it around the front brake lever and throttle.

 

[rap47]

Parking brake removal.....http://www.hdforums.com/forum/attac...king-brake-on-2009-tg-park-brake-assembly.jpg

 

[PIGGI]

Parking brake removal.....http://www.hdforums.com/forum/attac...king-brake-on-2009-tg-park-brake-assembly.jpg

Do you just leave the rest of the parts on the brake calipers? :xzqxz:

 

[screwball]

Takes me about 5 minutes to adjust the parking break on both trikes. I replaced the Allan head set screw with a thumb screw so you don't need any tools. If the trike starts to slip I adjust it 1 revolution. Still moves, 1 more revolution. Just make sure that when the hand break is released the pads don't drag.


OR, take the break off, whatever tickles your fancy.

 

[rap47]

Do you just leave the rest of the parts on the brake calipers? :xzqxz:

Yes, the arm that the cables were attached to stays along with the springs on those arms.

 

[msocko3]

Yes, the arm that the cables were attached to stays along with the springs on those arms.

ThumbUpOne of the best things I did to the 10 I used to have and my dads 09.

 

[KindaOldTriker]

Ditto on the velcro. Bought a strip a couple feet long at Joann Fabrics that is an inch wide, and cut a couple for my trike and wifes Sportster trike that never had a brake. Just leave it looped over the mirror shaft.